LOCKING BRACKET for WOODEN SLIDING DOORS
1x L Shape Bracket – to relocate female latch to this bracket and install it on pet door insert frame
3x Small Plates: 2x for Angle Bracket and 1x to connect pet door to frame
You will need to relocate your female latch to the L shape bracket, on the pet door insert in alignment to the handle.
You will need a hand drill with 3mm bit and also pair of pliers, to bend the small plates to create angle bracket you need.
PLATE TO CONNECT PET DOOR INSERT TO YOUR SLIDING DOOR FRAME
1x flat aluminium plate to connect pet door insert to your sliding door frame without any damage or new holes into your sliding door where female latch area is.
All you will need to do is put one screw through the plate into exisiting hole inside track where your female latch used to sit in your glass sliding door, and bend the plate and bring it forward to the front frame / extrusion of the pet door insert and put 2nd screw through the plate. So this plate will be connecting pet door insert to your sliding door frame and no one will be able to push the pet door insert out.
Stay away from drilling too close to glass (Stay away 1.5cm away from glass on the extrusion of pet door frame)
Video – Plate to connect pet door to frame
Like us to check if your locks are ok and compatible for a pet door insert installation and locking? Please email us few photos of your doors and both locks to email@example.com