Easy Installation
How to insert a Patio Pet Door Insert into your glass sliding door in 5 seconds!
Simply open your glass sliding door. Insert the pet door insert into the bottom track of your glass sliding door, lean it to the side, extend the top adjustable panel and turn two black knobs clockwise to make top adjustable panel stay in place and you are done.
Where to install a black rubber weather seal - instructions.
Every Patio Link Pet door insert comes with a rubber weather seal.
How to install a Locking Bracket - video
Every Patio Link Pet door insert comes with a FREE locking bracket. Locking bracket will allow you to relocate your current female latch to a locking bracket so you can close and lock glass sliding door only.
How to install a L Bracket for wooden sliding doors - video
.
How to install an Adaptor Panel - video
Adaptor is optional feature / add on.
By installing an adaptor, you will be able to close BOTH Glass and Screen door into an adaptor panel.
Enjoy breeze coming inside and keep unwanted bugs out! Excellent feature!
How L PROFILE (Adaptor Extender) works - video
Suitable for Stacker doors!
How does a Corner Installation work - video
Install a pet door insert in a corner where your fixed glass panel is. Please check if you can allocate where connecting screws are around the fixed panel. Once you find them, you can take screws out and slide the fixed panel across. If your doors allow you to do this, then you can install a Pet Door insert in a corner and then butt up the fixed panel to the pet door insert. Secure fixed panel into a new position by adding couple of screws at the top of the fixed door frame.
How to connect a pet door insert to your sliding door frame using a PLATE - video
1 Plate is included with your Patio Link Pet door insert.
How a Patio Link Pet door works for Double Sliding doors (middle opening) - video
To ensure WHEELS will work - make sure your bottom inside channel of your glass sliding door is 26mm wide or more
How to install WHEELS into your Patio link pet door insert - video
To ensure WHEELS will work - make sure your bottom inside channel of your glass sliding door is 26mm wide or more
How do LEGS work? - video
If your glass sliding door track is less than 26mm wide (between 22-25mm wide), you will need a set of legs for the bottom of the pet door insert.

How to install a Patio Link Pet door in a wider sliding door track
If your glass sliding door tracks are wider than standard, you will need to sit the pet door insert on top of the rail, as shown on the photo.
Purchase a Plate $5 to create an angle bracket. One screw goes into bottom of the pet door insert and other leg of the bracket is extended to the end of the track. This will give a pet door extra stability once installed and you will be able to align the locks nicely together.
How lockable flap cover works - video
Lockable Flap Cover is included with your Patio Link Pet door insert.
How to remove a corner magnetic clip from your semi hard flap - video
If you like to make the magnetic resistance weaker, you can remove 1 or both corner black clips from your flap.
How to install a Window Extension for Height 2.21-2.30 and 2.31-2.40m tall - video
Extend your height with a window extension.
How to install a Window Extension for Height over 2.41m+ video
Extend your height with a window extension.
How to put a black knob into your pet door insert - video
.
How to install a Sure Flap on a Medium Patio Link Pet door insert - video
Micro Chip Reader Flap
How to install a spring plunge into your lockable flap cover - video
.